Item |
CE5000-60 |
CPU |
32-bit CPU |
Configuration |
Grit rolling |
Drive system |
Digital servo |
Maximum cutting area |
603 mm x 50 m |
Range of guaranteed precision |
584 mm x 5 m*1 |
Compatible media widths |
Minimum: 50 mm Maximum: 712 mm |
Maximum media thickness |
0.25 mm |
Maximum cutting speed |
60 cm/s (in all directions) |
Specifiable cutting speeds |
1-10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60 cm/s |
Cutting force |
0.2-2.9N (20 gf to 300 gf) (31 levels) |
Minimum character size |
Approximately 5 mm for alphanumeric characters (varies depending on the medium, font, etc.) |
Mechanical resolution |
0.005 mm |
Programmable resolution |
GP-GL: 0.1/0.05/0.025/0.01 mm; HP-GLTM *2: 0.025 mm |
Repeatability precision |
0.1 mm or less per 2 m*1 |
No. of pens mountable |
1 pen |
Compatible cutter type |
Supersteel cutter blades |
Compatible pen type |
Water-based fiber-tip pens |
Compatible cutting film |
Marking film (PVC, fluorescent, or reflective film) up to 0.25 mm in thickness (excluding high-luminosity reflective film) |
Interfaces |
RS-232C/USB 2.0 (Full Speed) |
Buffer capacity |
2 MB |
Command modes |
GP-GL, HP-GLTM *2(selected on the control panel) |
Display panel |
Liquid crystal display (16 characters x 1 row) |
Rated power supply |
100 to 240 V AC, 50/60 Hz |
Power consumption |
100 VA |
Operating environment |
10°C to 35°C, 35% to 75% RH |
Conditions for guaranteed precision |
16°C to 32°C, 35% to 70% RH |
External dimensions (W x D x H)*3 |
Approx. 851 x 585 x 1004 mm |
Weight*3 |
Approx. 25 kg |